| RSA-1220D |
Remote Site Access ADSL/VDSL2 router
The MuLogic RSA-1220D is a router for access to remote locations such as power substations, traffic management systems and various other remote site automation equipment.
The unit is equipped with an ADSL/VDSL2 port and an Ethernet port with VLAN support that can be configured as LAN or WAN port.
The RSA-1220D incorporates 2 independent serial port gateways that can be used for remote access to devices with a serial interface. One serial gateway connects to an RS232 port, the other to an RS485 port.
The unit is designed for industrial applications and is powered from low voltage DC or AC power sources.
The RSA-1220D operates over a temperature range from -40°C to +70°C
The RSA-1220D is designed for remote access to sites like electric power substations, roadside cabinets for traffic control and remote surveillance and the like. It provides access to remote terminal units with Ethernet or serial ports.
The RSA-1220D can be used to replace Dial-up and leased line modems and offers high speed Ethernet communications while maintaining support of serial communication. This allows for easy migration to the use of remote terminal units with Ethernet interface and other devices such as remote surveillance cameras while maintaining connectivity to devices with a serial RS232 or RS485 port.WAN ports
Apart from using the DSL line or Mobile network for connection to the internet, in case that the Ethernet port is not used for connecvting local devices, the RSA-1220D can also use its Ethernet port for WAN access via an external modem or router or a fiberoptic internet connection. Both untagged and tagged (VLAN) operation is supported.
Failover operation of WAN ports and interfaces
All WAN interfaces can be used as primary WAN or back-up WAN interface.
Serial port gateways
The integrated Serial Port gateways offer remote access to the unit's serial ports.Information and Access Security: IPsec, OpenVPN and Firewall.
One gateway connects to the RS485/RS422 port, the other to the RS232 port.
Combined operation of RS232 and RS485 to a single gateway is also possible.
The network connection to the serial port gateways allows for the use of various tools like "virtual com port drivers", direct IP socket connection or dedicated application software. Also other "serial to Ethernet converters" or another Mulogic router can be used. In addition, the serial ports can also be accessed by means of a telnet connection.
As the unit in most cases will be connected to the public internet, extra security features such as IPsec and OpenVPN are supported. IPsec and OpenVPN protect against unwanted access and eavesdropping of the data. With IPsec and OpenVPN encrypted virtual tunnel connections can be created. Only devices at the end-points of the tunnel can communicate and the data is protected from eavesdropping.
The RSA-1220D can be configured and managed in multiple ways:
The RSA-1220D is equipped with a galvanically isolated power input.
Extended temperature range
The RSA-1220D is designed for operating under extreme temperature conditions.
xDSL encapsulation protocols
Dimensions and weight
Mulogic BV - Plesmanstraat 58D - 3905KD - Veenendaal - The Netherlands - Tel: +31 850 160600 Fax: +31 850 160601