The standard version 2.1-4398 firmware will not fit in older units with 8MB flash.
When loading this file you will be notified.
For these units use version 2.1-4398.2 (without OSPF support)
Latest
software release: 2.1-4398 (November 24, 2020) Release
notes
Firmware
- RSA-4222, RSA-4222W3, RSA-4222W4
Download
-
RSA-4122, RSA-4122W3, RSA-4122W4 Download
- RSA-1220M, RSA-1220W3, RSA-1220W4
Download
- RSA-1120M, RSA-1120W3, RSA-1120W4 Download
- RSA-1020DW3, RSA-1020DW4, RSA-1020DW1 Download
- RSA-1220D
Download
- RSA-1120D Download
- RSA-4122, RSA-4122W3, RSA-4122W4 with 8MB flash memory (no OSPF)
Download
Firmware archive
RSA-series data sheets Download
RSA-series
web configuration guide Download
RSA-4222/RSA-4122 hardware and startup guide Download
RSA-1220/RSA-1120 hardware and startup guide Download
RSA-series RADIUS attributes Download
RSA-series SNMP
MIB file
The MIB file is now added to the firmware and can be downloaded via the
Management>Access services>SNMP page of the unit's web interface.
Notes:
1. After loading new firmware, it may be neccesary to reload the page
in the web
browser in order to update
the html content that is stored in the web
browser's
cache. If the unit's web interface remains in the web
browser's cache then any
new menu items may not be displayed.
2. When upgrading from RSA-4122(W) version 1
software to version 2 software,
the settings of the version 1 software will not be used (but will
remain stored on
the system as back-up).
For running with the V2 software, a new configuration will have to be
made, which
means that you cannot do the upgrade from a remote location over any of
the WAN
ports.
